DRUCK德魯克DPI705E壓力指示儀|壓力計

Druck DPI 705E系列手持式壓力計和可選溫度指示器將堅固耐用的設計與準確可靠的測量結合在一起。DPI 705E系列結構緊湊、性能可靠，專為單手操作而設計，提供了日常維護和系統故障排除所需的許多基本功能。Druck DPI 705E-IS型號是用于危險環(huán)境的本質安 全（IS）版本。

DRUCK DPI 705E壓力指示儀|壓力計特點：

• 48種壓力范圍為±25 mbar至1400 bar（±1.69 psi至20000 psi/2.5 KPa至140 MPa）
• 在-10°C至+50°C的溫度范圍內，1年總不確定度降至滿量程（FS）的0.05%
• 帶校準到期倒 計時顯示的整體校準記錄
• 堅固的手持設計，配有背光高對比度顯示屏
• 泄漏測試、清零、Max./min.和過濾器
• 危險區(qū)域（本質安 全）版本可用
• 可選遠程即插即用壓力和電阻溫度檢測器（RTD）傳感器
• 可選氣動和液壓手泵

DRUCK DPI 705E壓力指示儀|壓力計量程范圍：

DPI705E包括內部絕 對、表壓或差壓傳感器。任何數量的遠程壓力傳感器都可以與單個DPI705E一起使用，因為所有傳感器都保存自己的校準數據，并配有2.9m（9.5英尺）的電纜。內部和遠程傳感器配有壓力接頭，詳情如下：
25 mbar–200 bar（10 inH2O-3000 psi/2.5 kPa-20 MPa）：G1/8 BSP內螺紋
差壓傳感器參考端口：Legris 4 mm油管適配器
≥350巴（5000磅/平方英寸/35兆帕）：高壓釜9/16 x 18 UNF外螺紋
DRUCK DPI 705E壓力指示儀|壓力計訂貨編碼：

Model Type 

DPI705E 區(qū)域安 全壓力指示器

DPI705EIS 危險環(huán)境壓力指示器 

        精度  

        1 標準精度

        2 高精度

               壓力量程和壓力類型; (Mandatory to select only one e.g. 008A for each configuration) 

                                                                             表壓Gauge (G)        絕壓 Absolute (A)        差壓Differential (L) 

                                    25 mbar / 10 inH2O / 2.5 kPa          008G                         -                            008L 

                                    70 mbar / 1 psi / 7 kPa                     01G                           -                            01L 

                                    200 mbar / 3 psi / 20 kPa                 02G                           -                             02L 

                                    350 mbar / 5 psi / 35 kPa                 03G                         03A                            03L 

                                    700 mbar / 10 psi / 70 kPa                 04G                         04A                           04L 

                                    1 bar / 15 psi / 100 kPa                     05G                         05A                           05L 

                                    2 bar / 30 psi / 200 kPa                     07G                         07A                            07L 

                                    3.5 bar / 50 psi / 350 kPa                    08G                         08A                             - 

                                    7 bar / 100 psi / 700 kPa                     10G                         10A                             - 

                                    10 bar / 150 psi / 1000 kPa                 11G                            11A                            - 

                                    20 bar / 300 psi / 2 MPa                     13G                             13A                             - 

                                    35 bar / 500 psi / 3.5 MPa                    14G                             14A                            - 

                                    70 bar / 1000 psi / 7 MPa                     16G                             16A                             - 

                                    100 bar / 1500 psi / 10 MPa                 165G                             165A                           - 

                                    135 bar / 2000 psi / 13.5 MPa                 17G                             17A                             - 

                                     200 bar / 3000 psi / 20 MPa                 18G                             18A                               - 

                                    350 bar / 5000 psi / 35 MPa                     -                                 20A                             - 

                                    700 bar / 10000 psi / 70 MPa                     -                                 22A                             -

                                                                                                                                     壓力接口Pressure fitting 

                                                                                                              P1 G1/8 BSP Female For ranges less than 350 bar 

                                                                                                              P2 G1/4 BSP Female Adaptor For ranges less than 350 bar 

                                                                                                              P3 1/8 NPT Female Adaptor For ranges less than 350bar 

                                                                                                              P4 1/4 NPT Female Adaptor For ranges less than 350 bar 

                                                                                                              P5 Quick-Fit Adaptor For ranges less than 350 bar 

                                                                                                     P6 9/16 x 18 UNF Male Mandatory for ranges greater than/equal to 350 bar 

                                                                                                        Hazardous Area Approvals (Mandatory to select one) 

                                                                                                        H0 No Hazardous Area Approval (Default if DPI705E selected) 

                                                                                                        H1 ATEX/IECEx H2 INMETRO (Brazil) 

                                                                                                                                Pressure Units 

                                                                                                                                 U0 All Pressure units (Default selection) 

                                                                                                                                  U1 Pa (Si) Pressure units only 

                                                                                                                                        Options (Mandatory to select one) 

                                                                                                                                                OP0 No option required 

                           OP1 Negative calibration for gauge ranges less than 35 bar (If selected, the calibration certificate includes values down to -1 bar g.) 

DPI705EIS - 1 – 07G – P2 - H1 - U0 - OP1 (Example Part Number）